홈페이지_왼편연락처.png
 
 
 

 
   

   
 
 

 
기타 >> HOME > Cisco > 기타


GLC-SX-MMD=
판매가 : 견적문의
제조사 : CISCO
사양 : GE SFP, LC connector SX transceiver
수량 :
배송료 : 배송료 없음
 
 






<주요사양>


*Part Number: GLC-SX-MMD= DOM기능


 


*첨부된 파일 참고 하시기 바랍니다!


*문의 사항 있으시면 맨 마지막 줄에 있는 담당자에게 연락 하여 주세요!!


 


 


The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network (Figures 1 and 2). SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.


Figure 1. Gigabit Ethernet SFP



Figure 2. Cisco 1000BASE-T Copper SFP



1000BASE-T SFP for Copper networks


The 1000BASE-T SFP operates on standard Category 5 unshielded twisted pair copper cabling of up to 100m (328 ft) link length. Cisco 1000BASE-T SFP modules support 10/100/1000 autonegotiation and Auto MDI/MDIX.

1000BASE-SX SFP for Multimode Fiber Only


The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 μm multimode fiber links up to 550 m and on 62.5 μm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 μm multimode fiber cable.

1000BASE-LX/LH SFP for Both Multimode and Single-Mode Fibers


The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable. For details on this implementation, refer to http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html.

1000BASE-EX SFP for Long-Reach Single-Mode Fibers


The 1000BASE-EX SFP operates on standard single-mode fiber-optic link spans of up to 40 km in length. A 5-dB inline optical attenuator should be inserted between the fiber-optic cable and the receiving port on the SFP at each end of the link for back-to-back connectivity.

1000BASE-ZX SFP for Long-Reach Single-Mode Fibers


The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 23 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.

When shorter distances of single-mode fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.

1000BASE-BX10-D and 1000BASE-BX10-U SFP for Single-Fiber Bidirectional Applications


The 1000BASE-BX-D and 1000BASE-BX-U SFPs, compatible with the IEEE 802.3ah 1000BASE-BX10-D and 1000BASE-BX10-U standards, operate on a single strand of standard SMF.

A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard SMF with an operating transmission range up to 10 km.

The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices as depicted in Figure 3: 1000BASE-BX10-D transmits a 1490-nm channel and receives a 1310-nm signal, whereas 1000BASE-BX10-U transmits at a 1310-nm wavelength and receives a 1490-nm signal. Note in Figure 3 the presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1310-nm and 1490-nm light paths.

Figure 3. Bidirectional Transmission of a Single Strand of SMF



The GLC-BX-D and GLC-BX-U SFPs also support digital optical monitoring (DOM) functions according to the industry-standard SFF-8472 multisource agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Technical Specifications


Platform Support


The Cisco SFPs are supported across a variety of Cisco switches, routers, and optical transport devices. For more details, refer to the document SFP Compatibility Matrix at http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.pdf.

Connectors and Cabling


Connectors include the following:

• Dual LC/PC connector (1000BASE-SX, 1000BASE-LX/LH, and 1000BASE-ZX)


• Single LC/PC connector (1000BASE-BX-D and 1000BASE-BX-U)


• RJ-45 connector (1000BASE-T)


Note: Only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in the standards section.


Table 1 provides cabling specifications for the SFPs that you install in the Gigabit Ethernet port. Note that all SFP ports have LC-type connectors, and the minimum cable distance for all SFPs listed (multimode and single-mode fiber) is 6.5 feet (2 m).

Table 1. SFP Port Cabling Specifications







































































































Product


Wavelength (nm)


Fiber Type


Core Size (μm)


Modal Bandwidth (MHz* Km)


Operating Distance (m)


1000BASE-SX


850


MMF


62.5


160


220 (722 ft)

     

62.5


200


275 (902 ft)

     

50


400


500 (1,640 ft)

     

50


500


550 (1,804 ft)

     

50


2000


1000 (3281 ft)


1000BASE-LX/LH


1310


MMF*


62.5


500


550 (1,804 ft)

     

50


400


550 (1,804 ft)

     

50


500


550 (1,804 ft)

   

SMF


-**


-


10,000 (32,821 ft)


1000BASE-EX


1310


SMF


-**


-


40,000 (131,234 ft)


1000BASE-ZX


1550


SMF


-


-


Approximately 70 km depending on link loss


1000BASE-BX-U


1310


SMF


-**


-


10,000 (32,821 ft)


1000BASE-BS-D


1490


SMF


-**


-


10,000 (32,821 ft)



*A mode-conditioning patch cord, as specified by the IEEE standard, is required regardless of the span length. Note how the mode conditioning patch cord for 62.5-μm fibers has a different specification from the mode-conditioning patch cord for 50-μm fibers.


**ITU-T G.652 SMF as specified by the IEEE 802.3z standard.


Optical Specifications


Table 2 gives optical parameters for the SFPs.

Table 2. Main Optical Parameters





























Product


Transmit Power (dBm)


Receive Power Range (dBm)


1000BASE-SX


-3 to -9.5


0 to -17


1000BASE-LX/LH


-3 to -9.5


-3 to -20


1000BASE-EX


+3 to -1


+1 to -22


1000BASE-ZX


+5 to 0


-3 to -23


1000BASE-BX10-D


1000BASE-BX10-U


-3 to -9


-3 to -19.5



Dimensions


Dimensions (H x W x D): 8.5 x 13.4 x 56.5 mm. Cisco SFPs typically weigh 75 grams or less.

Environmental Conditions and Power Requirements


Operating temperature range:

• Commercial temperature range (COM): 0 to 70°C (32 to 158°F)


• Extended temperature range (EXT): -5°C to 85°C (23 to 185°F)


• Industrial temperature range (IND): -40 to 85°C (-40 to 185°F)


• Storage temperature range: -40 to 85°C (-40 to 185°F)


Table 3 gives electrical parameters and Table 4 gives temperature range and DOM support information for the SFPs.

Table 3. Electrical Parameters

































Parameter


Symbol


Minimum


Typical


Maximum


Units


Supply Current


Is


-


200


300


mA


Surge Current


ISurge


-


-


30


mA


Input Voltage


Vcc


3.1


3.3


3.5


V



Table 4. Temperature Range and DOM Support































































Product Number


Temperature Range


DOM


GLC-SX-MM


COM


No


GLC-LH-SM


COM


No


GLC-ZX-SM


COM


Yes


GLC-BX-U


COM


Yes


GLC-BX-D


COM


Yes


GLC-T


COM


n/a


SFP-GE-T


EXT


n/a


SFP-GE-S


EXT


Yes


SFP-GE-L


EXT


Yes


GLC-EX-SMD


EXT


Yes


SFP-GE-Z


EXT


Yes


GLC-SX-MM-RGD


IND


No


GLC-LX-SM-RGD


IND


No




 
2014-12-31 14;41;25.PNG